0808 PDC Flat Cutter for Mining - FC0808
Diameter: 8mm
Height: 8mm
Diamond layer thickness: 1.5mm-1.8mm
Chamfer: 0.3mm x 45°
Zati:
0808 PDC Flat Cutter for Mining - FC0808 :
Product Specification
· Model No.: FC0808
· Product Type: Mining PDC Flat Cutter
· Tooth Shape: Flat
· Diameter (mm): 8.00
· Total Height (mm): 8.00
· Diamond Height (mm): 1.5-1.8
· Chamfer: 0.3mm x 45°
· Application: Mineral exploration, coal mining, rock drilling, quarry, pavement repairing
· Key Feature: Low profile design for high-density cutter layouts
Product Description
FC0808 Mining PDC cutter: Precision Small-Diameter Cutting for Complex Formations
For demanding mineral exploration in hard and abrasive formations, the FC0808 offers a specialized solution among our mining-grade flat cutters. Unlike larger cutters that prioritize bulk removal, the 8.00mm diameter and 8.00mm total height of this model are engineered for applications requiring a low-profile cutting geometry. This compact size allows drill bit manufacturers to increase cutter density on smaller-diameter bits, distributing point-load stresses more evenly across the bit face.
The FC0808 features a 1.5-1.8mm diamond layer bonded to a tungsten carbide substrate, providing an optimal balance between impact resistance and wear life for mid- to high-hardness rock strata. The 0.3mm x 45° chamfer helps prevent edge chipping during initial impact, a common failure point in percussive drilling environments. Whether you are designing a thin-kerf coring bit or a step-type pilot bit for raise boring, this flat cutter delivers consistent, reliable shearing action in coal measure strata and medium-hard sandstone formations.
FC series
The Flat Cutter (FC) series for mining applications is available in multiple dimensions to suit various bit designs and formation hardness levels. Below are the standard mining-grade options:
Model No. | Diameter (mm) | Total Height (mm) | Diamond Height (mm) | Chamfer |
FC0810 | 8.00 | 10.00 | 1.5-1.8 | 0.3mm x 45° |
FC1008 | 10.00 | 8.00 | 1.5-1.8 | 0.3mm x 45° |
FC1010 | 10.00 | 10.00 | 1.5-1.8 | 0.3mm x 45° |
FC1308 | 13.40 | 8.00 | 1.5-1.8 | 0.3mm x 45° |
FC1313 | 13.40 | 13.00 | 1.5-1.8 | 0.3mm x 45° |
FC1608 | 16.00 | 8.00 | 1.5-1.8 | 0.3mm x 45° |
FC1610 | 16.00 | 10.00 | 1.5-1.8 | 0.3mm x 45° |
FC1613 | 16.00 | 13.00 | 1.5-1.8 | 0.3mm x 45° |
| Note: Custom heights and chamfer angles are available for OEM orders. | ||||
You may also need:
FC1313 Mining Flat Cutter – Larger diameter (13.40mm) with taller profile (13.00mm) for higher impact load applications. → FC1313
FC1610 Mining Flat Cutter – Wide 16.00mm cutting face with medium 10.00mm height for aggressive shearing in softer formations. → FC1610
Oil/Gas FC0808 Flat Cutter – Similar dimensions (8.00x8.00mm) but with thicker diamond layer (1.8-2.5mm) for petroleum drilling conditions. → Oil & Gas FC0808
